Free Process Essays - How to Operate a Manual Transmission :: Expository Process Essays

How to Operate a Manual Transmission A bulky majority of our population find operating a manual transmission, or stick breach, to be extremely difficult. However, in actuality all it takes is some wicked practice and devotion to make driving a stick channelize like second nature. For successful driving, the same steps must be followed each time the railway car is driven. The stick shift panel is typically located between the two front seats of the vehicle. The stick shift can be moved left to right and up and low-spirited for changing delivers. The bag pedal is usually found to the right of the stop pedal. Specifically, on a standard five speed, the gears are as follows apathetic is located in the middle of the panel. From neutral, gears must be changed accordingly. First gear is found to the far upper left, and is use to get the car abject from a stopped position. Down left is second gear, used for speeds up to twenty-five miles per hour. Third gear is located u pper middle of the panel, used for speeds from about twenty-five to forty miles per hour. Fourth gear is found at the lower middle and would be good for between forty and 50 miles per hour. Fifth gear is found to the far upper right, and is used for high driving speeds such as on the freeway. Last but not least is reverse, which is to the far bottom right, used for backing up. These gears must be maneuvered the exact same way each time the automobile is driven. Undoubtedly, calculation out the timing of letting out the clutch and giving the car more gas can be the trickiest part of driving a stick shift. The clutch is found to the far right of the brake. When changing gears, the clutch must always be pushed to the floor with the left foot or immediately the cars gears go out grind. The clutch must be slowly let out as more gas is given to the car. The timing of this dish out must be perfect to ensure a that the car will initiate to slowly move forward. As for stopp ing, such as at a red light or a stop sign, begin by moving the gear shift to the neutral position.